Threshold Ramp
Results: 55
Accessible Saddle Threshold
Handicap accessible thresholds made of mill aluminum, anodized dark bronze alluminum, or mill brass, with various treads. DIMENSIONS: Thresholds have a maximum center-threshold height of 0.25, 0.31, 0.5, or 0.63 inches, with lengths of 2.5, 3, 4, 5, 6, 7, or 8 inches.
Ada Ramp Thresholds (Models 442S, 443S, & 444S)
The ADA Ramp Threshold is a threshold ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Model 442S provides a 1:12 slope from the floor to a point 0.5 inch higher. Model 443S provides a 1:12 slope starting from the edge of a threshold. Model 444S is a combination of 442S and 443S. Made of mill finished anodized aluminum, the ramp comes with ten 1.5-inch flat head wood screws. OPTIONS: Sure-Step non-slip abrasive coatin
Aluminium Threshold Ramp
The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long.
Aluminum Threshold Ramp
The Aluminum Threshold Ramp is a threshold RAMP designed to make doorways accessible to individuals who use wheelchairs or scooters. This aluminum ramp has an anti-slip, high traction sandpaper surface. The ramp has mounting holes in its top corners and comes with hardware to secure it to the doorway surface. DIMENSIONS (LxW): 8, 10, 12, 16 or 24 x 32 inches or 16 or 24 x 36 inches. The rise is 0.25 to 0.5, 0.5 to 0.75, 0.75 to 1, 1.5 to 2, or 1.5 to 3 inches depending on length. WEIGHT: 3 to 15
Bariatric Threshold Ramp (Models Btr 1636 & Btr 2436)
The Bariatric Threshold Ramp is an accesible threshold designed to make doorways accessible to individuals who use wheelchairs or scooters. This bariatric threshold ramp is made of lightweight aluminum with an anti-slip, high-traction sandpaper surface. It covers a threshold rise of 1.5 to 3 inches (model BTR 1636) or 2 to 4 inches (model BTR 2436), and comes with mounting holes and the hardware needed to secure it to the door molding. DIMENSIONS (LxW): 16 or 24 x 36 inches. CAPACITY: 800 pounds
Big Horn Threshold Wheelchair/Scooter Ramps
The Big Horn Threshold Wheelchair/Scooter Ramps is designed to provide access for individuals with lower extremity, mobility and walking disabilities, spinal cord injury, and wheelchairs users. The device is specifically designed to accommodate up to 1 1/2 inch doorway threshold heights. The gradual tapered front edge has a 22 degrees side slopes which provides safety and easy entry access. The wheelchair ramps are constructed from recycled plastic material and features a patented bonding system
Bighorn Plastic Threshold (Model Bhr1110)
The BigHorn Plastic Threshold, model BHR1110, is a threshold ramp designed for use to make doorways accessible to wheelchair users. This threshold is slip resistant and can support a heavy load. Made from recycled plastic, it can be vertically cut for height and notched for door molding with typical rotary saws. It has molded miter ends and comes with high grade butyl rubber peel and stick tape for installation. OPTIONS: Shim kit to accommodate rise up to 2 inches. DIMENSIONS (LxW): 12 x 42.75 i
Bridge Threshold Ramp (Models Tr1, Tr1.5, Tr2, & Tr3)
The Bridge Threshold Ramp is designed to provide wheelchair or scooter access over single steps or doorways. The ramp is made from aluminum with a non-slip surface. OPTIONS: Light duty plate for creating a bridge between the ground and doorway threshold. DIMENSIONS (LxW): 8 x 36 (model TR1), 10 x 36 (model TR1.5), 14 x 36 (model TR2), or 18 x 36 inches (model TR3). Rise is 1 inch (model TR1), 1.5 inches (model TR1.5), 2 inches (model TR2), or 3 inches (model TR3). CAPACITY: 750 pounds.
Bumper Threshold (Model 477S)
The Bumper Threshold, model 477S, is a threshold ramp designed for use in emergency exits to allow wheelchair users to exit a room while not allowing entrance. The threshold is made of aluminum with a vinyl, neoprene, EDPM, TPE, silicone or pile insert, and comes with 10 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types or anchors. DIMENSIONS (HxW): 0.5 x 5 inches. COLOR: Mill finish aluminum, dark bronze anodized aluminum, or gold anodized aluminum.
Butt Ramp
The Butt Ramp is a portable threshold ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over thresholds or to get on or off of a curb. This straight aluminum ramp has a low rise and is available with wheel guards on both sides or on the left or right side only. The high end of the ramp butts up against the wall under the threshold, and it is raised by legs. The lower end
Carpet Threshold (Models 503S, 504S, 505S, 506S, & 508S)
The Carpet Threshold, models 503S, 504S, 505S, 506S and 508S, is a threshold ramp designed for use to allow wheelchair users to move between carpeted areas. The threshold comes with 10 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types or anchors. DIMENSIONS (HxW): 0.875 x 2 inches (model 503S); 0.5 x 2.13 inches (model 504S); 0.45 x 0.81 inches (model 505S); 0.81 x 4 inches (model 506S); 0.69 x 1.81 inches (model 508S). COLOR: Mill finish aluminum, dark bronze
Cherry / Oak / Walnut Ada Compliant Interior Threshold
The Cherry / Oak / Walnut ADA Compliant Interior Threshold is a threshold ramp designed to provide access for wheelchair users and others with mobility, lower extremity, or walking disabilities. The ramp slopes up both sides gradually, to allow wheelchair users to roll over, and also to provide less obstruction for individuals with walking disabilities. This wooden ramp is available in cherry, oak, or walnut. DIMENSIONS (HxLxW): 0.5 x (24, 36, 48, 60, or 96) x (3.5, 4.5, or 6.5) inches.
CourtEdge Reducer
CourtEdge™ Reducers are threshold ramps designed to help make flooring transitions more accessible to individuals who use wheelchairs. These ramps can meet almost every floor transition requirement - from ½ inch up to 2½ inches in standard models, and custom heights exceeding 4½ inches. Made of 100% recycled rubber tire, CourtEdge™ Reducers have a slip-resistant surface and no load weight limitations. They are available in hundreds of configurations for interior and exterior use, and are pre-cut
Curb Ramp
The Curb Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over curbs or uneven thresholds. Made from aluminum, the ramp is available with wheel guards on both sides, or with no wheel guards, allowing it to be used at a threshold where a door swings out. It has transition plates on both ends for a smooth entrance onto or exit off of the ramp. DIMENSIONS
Decpac Personal Mini Ramp (Model Mp24)
The Decpac Personal Mini Ramp, model MP24, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. The ramp is small enough to carry in a bag on a wheelchair and can be stored in a vehicle or at home. The ramp is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber g
Decpac Personal Standard Ramp (Model Mp210)
The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick,
Endurant Receptor Ramp
The Endurant Receptor Ramp is a shower ramp designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The ramp offers a transition between the floor and a BioPrism shower base receptor (sold separately). The ramp has a non-skid, textured surface which helps prevent slips and falls. It is manufactured from a solid pour of BioPrism solid surface. DIMENSIONS (WxL): 12 inches wide; up to 72 inches long
EntryLevel Landing
EntryLevel Landings are accessible thresholds designed for use in commercial and public buildings to provide access for individuals who use wheelchairs. This modular, pre-fabricated unit is made from 100-percent recycled materials and is installed with high-grade adhesive to provide a solid door threshold transition. COLOR: The unit is available in color options that match the original substrate or to provide a visual color cue for pedestrian safety. DIMENSIONS: All models are 60 inches wide; av
EZ Edge Rubber Threshold Ramp System (Models Raez0010, Raez0020, Raez0030, Raez0040 & Raez0050)
The EZ Edge Rubber Threshold Ramp System, models RAEZ0010, RAEZ0020, RAEZ0030, RAEZ0040 and RAEZ0050, is a threshold ramp designed to provide access for individuals with lower extremity, mobility and walking disabilities, spinal cord injury and others who use wheelchairs. Molded under heat and pressure, these 100 percent recycled rubber, anti-slip ramps feature rounded front edges and molded traction pads and can be planed or trimmed to fit any doorjamb or uneven rise. The ramps may be installed
Ez-Access Threshold Ramp (Models 1, 1.5, 2, 3, 4, 5 & 6)
The EZ-Access Threshold Ramp is designed for persons with physical disabilities who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of durable extruded anodized aluminum and has a long, non-skid driving surface for maximum safety and support. A special finish resists dents and scratches. A flap attachment for sliding door tracks and installation hardware are included. Ramps accommodate t
Ez-Access Transitions Modular Entry Ramp
Ez-Access Aluminum Threshold Ramp is ideal for doorways to create a smooth and strong entry and exit. It is made up with high-strength aluminum that never rusts or corrodes and features an extruded slip-resistant surface to increase safety. Transition Modular Entry Ramp can be used for doorways, raised landings and sliding glass doors. This Ramp proves to be practical for sliding glass doors as it does not interfere with the door track. It is lightweight and easily transported from one place to
Handicap Thresholds, Utility Thresholds, Rabetted Thresholds, & Traction Tread Thresholds
Handicap Thresholds, Utility Thresholds, Rabbetted Saddles, and Traction Tread Thresholds are accessible threshold saddles in a variety of styles. The saddles are constructed of extruded aluminum, with an aluminum, bronze, or stainless steel finish.
Hero Threshold Ramp (Models Aa Thresh 1, Aa Thresh 2, & Aa Thresh 3)
The Hero Threshold Ramp, models AA Thresh 1, AA Thresh 2 and AA Thresh 3, is an accessible threshold designed for use by individuals with mobility disabilities or spinal cord injury. This aluminum threshold ramp has an anodized, non-skid surface, and it is designed as a modular system in both the top surface and legs. DIMENSIONS (HxLxW): Usable area is 1 x 8.5 x 34 inches (AA Thresh 1); 2 x 14.5 x 34 inches (AA Thresh 2); 3 x 20.5 x 34 inches (AA Thresh 3). CAPACITY: 800 pounds. WEIGHT: 4 pounds
Inswing Exterior Door Threshold - Dark Bronze - Ada Compliant
The Inswing Exterior Door Threshold - Dark Bronze - ADA Compliant is an accessible threshold designed to modify a doorway to make it wheelchair accessible. A continuous dam provides a sill with a positive barrier to wind driven air and water infiltration, and helps maintain proper contact between the door bottom and sill for insulation and maintenance of the structure. Made of aluminum, the unit accomodates most single, hinged patio and french door systems configured with the door swinging inwar
Literamp Portable 1-Piece Wheelchair Ramp
The LiteRamp Portable 1-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury or others who use a wheelchair or scooter. The ramp has carrying handles, folds in the middle, and can be carried like a suitcase. It is made from aircraft aluminum, and it is fully covered with safety non-skid tape. This ramp is weather resistant so it can be left outdoor year-round. It is self-supporting to prevent slippage on sta
National Ramp Threshold Ramp (Aluminum)
The National Ramp Aluminum Threshold Ramp is a portable, modular ramp designed for use to make thresholds acccessible to wheelchair, walker, and cane users. This lightweight, durable, free-standing ramp can be placed indoors or outdoors in front of doorways, sliding glass doors, and raised landings. Made of anodized aluminum, the ramp is seam-free. The modular design with its interchangeable components accommodates thresholds from 0.75 to 6 inches high. DIMENSIONS: 34 inches wide.
National Ramp Threshold Ramp (Rubber Wedge)
The National Ramp Rubber Wedge Threshold Ramp is a portable ramp designed for use to make thresholds accessible to wheelchair users. The wedge is placed against the door threshold, either inside or outside, to provide a smooth ground-to-sill transition. Made of recycled tires, the ramp is slip resistant and portable. The ramp can be trimmed for lower heights and widths or combined to reach greater heights. For wider entrances, two ramps can be placed side by side. DIMENSIONS: 48 inches wide.
National Ramp Threshold Ramp (Rubber)
The National Ramp Rubber Threshold Ramp is a ramp designed for use to make thresholds accessible to wheelchair users. Placed in front of a door, it provides a smooth ground-to-sill transition. Made of 100 percent recycled materials, this portable indoor/outdoor ramp is slip-resistant and can be used on any surface. It can be trimmed or notched for a custom fit, and can be moved to any location. It does not interfere with door tracts, so it can be used with sliding glass doors. DIMENSIONS: 36 in
Outswing Exterior Door Threshold - Dark Bronze - Ada Compliant
The Outswing Exterior Door Threshold - Dark Bronze - ADA Compliant is a threshold ramp designed for use to modify a doorway to make it wheelchair accessible. A continuous dam provides a sill with a positive barrier to wind driven air and water infiltration, and supports proper contact between the door bottom and sill for insullation and maintenence. Made of aluminum, this threshold accommodates most single, hinged patio and French door system configurations with the door swinging outward. DIMENS
Outswing Exterior Door Threshold Ramp - Mill Finish
The Outswing Exterior Door Threshold - Mill Finish - ADA Compliant is a threshold ramp designed to modify a doorway to make it wheelchair accessible. A continuous dam provides a sill with a positive barrier to wind driven air and water infiltration, and is conducive to proper contact between the door bottom and sill for insulation and maintenance of the structure. Made of aluminum, the unit accomodates most single, hinged patio and french door system configurations in which the door swings outwa
Pemko Barrier Free Ramp Threshold (Model 257X259)
The Pemko Barrier-Free Ramp Threshold, model 257X259, is a modular threshold ramp designed for use to provide accessible thresholds for wheelchair users and individuals with mobility or walking disabilities. This ramp is available in cast aluminum, extruded bronze (brass), or anodized aluminum. OPTIONS: PemKote non-slip coating; cast aluminum wings (model WING10) that fit into each end of the ramp assembly and are fastened to the ramp mid sections with self-tapping machine screws. COLOR: Aluminu
Pemko Modular Ramp Threshold Assembly For Fluxh Applications (Models R.5F, R.75F, R1F, R1.25F, R1.5F, R1.75F, R2F, & R2.25F)
The Pemko Modular Ramp Threshold Assembly for Flush Applications is a modular threshold ramp designed for use to make doorways and floor offsets accessible to wheelchair users and individuals with mobility or walking disabilities. The ramp assembly is made from mill finished aluminum. The number of assembly components is 1 (model R.5F), 2 (models R.75F and R1F), 3 (models R1.25F and R1.5F), 4 (models R1.75F and R2F), or 5 (models R2.25F). The assembly comes with with #10 stainless steel wood scr
Pemko Recycled Rubber Ramp Assembly (Model Rr1.25Fmr)
The Pemko Recycled Rubber Ramp Assembly, model RR1.25FMR, is a modular threshold ramp designed for use by individuals with mobility or walking disabilities. It can be used at door thresholds or to transition between offset floors. The ramp has a diamond waffle pattern for traction. It can be field cut and coped, and is installed by gluing it to floor surfaces. The ramp is molded from 100 percent recycled rubber tires (20 mesh minus crumb reclaimed rubber with urethane binders). DIMENSIONS: 36, 4
Portable Perfolite Fixed Ramp (Models V5, V10 & E1)
The Portable Perfolite Fixed Ramp, models V5, V10 and E1, is a portable two-piece curb ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of single-piece tracks and includes a carrying handle. DIMENSIONS (LxW): 21.75 x 8.25 inches (V5); 45.75 x 8.25 inches (V10); or 41.75 x 10.5 inches. CAPACITY: 880 pounds per pair. WEIGHT: 3.5 pounds per ramp (V5); 7 pounds
Pride Silverstar Single Fold Ramp
The Silver Star Single Fold Ramp is a curb or threshold ramp designed for use by individuals with mobility disabilities. This lightweight, portable ramp has an integrated, high traction surface, and can be used to overcome a variety of obstacles at home and during travel. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 29.5 inches. CAPACITY: 600 pounds. WARRANTY: 3-year transferable warranty.
Pride Silverstar Solid Ramp
The Pride SilverStar Solid Ramp is a ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp has built-in traction control and side rails for safety, and is slotted for moisture drainage. It comes with securement components for mounting. DIMENSIONS (LxW): 1.5, 2, 3, 4, or 5 feet x 30 inches. CAPACITY: 600 pounds. WARRANTY: 3 year transferable warranty.
Pvi Bariatric Threshold Ramp (Models Bar1636 & Bar2436)
The PVI Bariatric Threshold Ramp, models BAR1636 and BAR2436, is designed for use to make doorways accessible to people with mobility disabilities or spinal cord injuries who use wheelchairs. Made of aluminum, these ramps have an anti-slip, high traction surface, and there are holes punched in the top corners to facilitate installations. Hardware to secure the ramp to a surface is included. DIMENSIONS (LxW) 16 x 36 inches for thresholds 1.5 to 2 inches high (BAR1636); 24 x 36 inches for threshol
Pvi Rubber Threshold (Models Raez0110, Raez1110, Raez1510, & Raez2100)
The PVI Rubber Threshold, models RAEZ0110, RAEZ1110, RAEZ1510 and RAEZ2100, is an accessible threshold designed for use by individuals with lower extremity, mobility or walking disabilities or spinal cord injury. Made of 100 percent recycled rubber, this threshold has a slip resistant surface, and it has no load weight limitations. It has molded miter ends, and it can be trimmed to fit a specific area with simple cutting tools. DIMENSIONS (DxW): 8.13 x 42 inches, with usable width of 36.25 inche
Ramp Threshold - Ada (Models 234A, 235A, & 236A)
The Ramp Threshold - ADA, models 234A, 235A, and 236A, is an accessible threshold ramp designed for use with thresholds that are too high for easy wheelchair access. The ramp is constructed of extruded aluminum. DIMENSIONS (HxL): 0.5 x 3 inches (234A), 0.25 x 3 inches (235A), or 0.5 x 3.94 inches (236A).
Rubber Threshold Ramp
The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch ri
Saddle Threshold (Model 713)
The Saddle Threshold, model 713, is a threshold ramp designed for use by people with mobility, lower extremity or walking disability. This door threshold is available with an aluminum, bronze, or stainless steel finish. It has a non-skid surface and is available with an abrasive coating. DIMENSIONS (HxW): O.3125 x 4.5 or 7 inches. Typical wall (top plate) 0.125 inch, CAPACITY: 0.74 pounds per foot at 5 inches to 1.01 pounds per foot at 7 inches.
Saddle Threshold (Model Cr3715)
The Saddle Threshold, model CR3715, is a threshold ramp designed for use to make carpet transitions accessible to wheelchair users. This heavy duty and durable threshold is available with a mill finish. The unit is drilled for screws (Included). DIMENSIONS (HxLxW): 0.25 x 36 x 5, 0.25 x 48 x 5, 0.25 x 72 x 5, or 0.25 x 96 x 5 inches. COLOR: Aluminum or dark bronze.
Saddle Threshold 1 (Models 401S, 402S, 403S, & 404S)
The Saddle Threshold 1 is a threshold ramp designed to provide wheelchair access in doorways. The mill finish bronze and stainless steel thresholds have a smooth surface; aluminum thresholds have a fluted surface. The threshold comes with ten 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types and anchors. DIMENSIONS (HxW): 0.31 x 2.5 inches (model 401S); 0.5 x 3 inches (model 402S); 0.25 x 4 inches (model 403S); 0.5 x 4 inches (model 404S). COLOR: Available in
Safeshower Transitions
SafeShower Transitions are shower ramps designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. These ramps can be installed with silicone adhesive for a permanent application or with double-back tape for less permanent applications. They have a slip resistant surface and are made of composite plastic that is not absorbent. SafeShower transitions come with a built-in side approach, or they can be
Self Supporting Adjustable Threshold Ramp (Models Ath1232 & Ath2432)
The Self Supporting Adjustable Threshold Ramp, models ATH1232 and ATH2432, is a ramp designed for use to make doorways accessible to wheelchairs for individuals with mobility disabilities or spinal cord injury. This ramp is designed for doorways that swing out or in, and its height is adjustable to fit a range of threshold rises. The unit aligns directly against the door threshold. Made of welded aluminum, it has a slip resistant grooved surface and accommodates wheelchairs and scooters with va
Self Supporting Threshold Ramp (Models Ssth1636-1.5, Ssth2436-2, Ssth2436-2.5 & Ssth2436-3)
The Self Supporting Threshold Ramp, models SSTH1636-1.5, SSTH2436-2, SSTH2436-2.5 and SSTH2436-3, is an accessible threshold designed to provide wheelchair access for doorways to individuals with mobility disabilities or spinal cord injury. This threshold ramp can be used in doorways with doors that swing out or in. It has an anti-slip, high-traction surface, and it is made of aluminum with durable, welded construction. DIMENSIONS (LxW): 16 x 36 inches with 1.5-inch rise (model SSTH1636-1.5);
Stand Alone Threshold Ramp
The Stand Alone Threshold Ramp is an accessible threshold designed to make a doorway or single- step rise accessible to wheelchair or scooter users. The threshold has adjustable legs with a two-inch range, which can be helpful for locations where the surface is uneven, such as decks or turf. The ramp is made of aluminum or painted steel with a non-slip button or expanded metal surface. Safety side curbs are cut level to the top of the threshold allowing a door to open over the ramp. DIMENSIONS (
Standard Threshold Ramp (Models Thr832, Th1032, Th1232, Th1632, Th1636, Th2432 & Th2436)
The Standard Threshold Ramp, models THR832, TH1032, TH1232, TH1632, TH1636, TH2432 and TH2436, is a threshold ramp designed to make doorways accessible to wheelchairs for individuals with lower extremity or mobility disabilities or spinal cord injury. The ramp has holes punched in its top corners so it can be secured to the surface of the doorway using hardware that is included with the ramp. The unit is made of lightweight, durable aluminum with an anti-slip, high traction surface. DIMENSIONS (
Stepless Excellent Doorstep Ramp Kit (Models 100, 101, 102, 103, & 104)
The Stepless Excellent Doorstep Ramp Kits, models 100, 101, 102, 103 and 104, is a threshold ramp designed for use to make doorway thresholds accessible to wheelchair users or individuals with walking disabilities. Each ramp has three layers, of which the two upper layers are loose for adjustment in height. The ramp in Kit 100 can level differences from 0 to 0.875 inches; Kit 101 is for differences from 0.875 to 1.625 inches; Kit 102 is for differences from 1.625 to 3 inches; Kit 103 is for diff
Stepless Excellent Doorstep Ramp Kits 0, 1, 2, 3, & 4 (Models 11-12100, 11-12101, 11-12102, 11-12103, & 11-12104)
The Stepless Excellent Doorstep Ramp Kits 0, 1, 2, 3, and 4, models 11-12100, 11-12101, 11-12102, 11-12103, and 11-12104, are ramps designed for use to make doorway thresholds accessible to wheelchair users and individuals with walking disabilities. Each ramp has three layers, of which the two upper layers are loose for adjustment in height. The ramp in Kit 0 (11-12100) can level differences from 0 to 0.875 inches; Kit 1 (11-12101) is for differences from 0.875 to 1.625 inches; Kit 2 (11-12102)
Stonecap Rubber Threshold (Models Stc0110, Stc1110, & Stc1510)
The StoneCap Rubber Threshold, models STC0110, STC1110 and STC1510, is an accessible threshold designed for use to make doorways and room entrances accessible for individuals with lower extremity, mobility and walking disabilities or spinal cord injury. Made of 100 percent recycled rubber, the threshold has a slip resistant surface, and it has no load weight limitations. It has molded miter ends, and it can be trimmed to fit a specific area with simple cutting tools. OPTIONS: Grooved surface ava
StoneCap™ Rubber Threshold Ramp
The StoneCap™ Rubber Threshold Ramp is a ramp and is made for wheelchair and scooter users and those individuals with walking disabilities and other lower extremity disabilities to allow them to travel uphill. The StoneCap™ Rubber Threshold Ramp by PVI features a durable, recycled rubber design. The ramp can be easily adapted to a variety of thresholds with simple cutting tools. It features a large weight capacity, a solid support surface, and comes in three lengths to choose from.
Threshold Ramp
The Threshold Ramp is an accessible threshold designed to enable wheelchair users to get through dooways and over thresholds. This low profile aluminum unit can adapt a doorway or threshold from 1 to 4 inches in height. Its top lip seamlessly covers the existing threshold for a smooth transition. The ramp is constructed from welded aluminum with a permanent skid resistant surface, and can be used indoors or outdoors. DIMENSIONS (LxW): 6, 12, 18, 24, or 36 x 30 or 36 inches. WEIGHT: 6 to 28 pound
Threshold Ramp - Lego-Style
The Threshold Ramp - Lego Style is a threshold ramp designed for use to make doorways accessible to wheelchair users and individuals with mobility or walking disabilities. The ramp is lightweight, and it allows water to flow through so it can be used outdoors, in a bathroom or other environments in which the floor or ground may get wet. It has a non-slip surface and can be used on both the inside and outside of the doorway for rolling over the threshold. It accommodates most doorway entrances in
Welcome Mat Ramp
The Welcome Mat Ramp is designed for use by individuals who have difficulty navigating doorway thresholds due to limited motor planning, lower extremity mobility and balance. The Welcome Mat is designed for structures with thresholds of 1 inch to 8 inches. When not in use, the carpet covered ramp lies flat and serves as a doormat. This ramp comes in a manual or a powered version that operates with a wireless remote. Simply pull a lever or push a remote button and the door side of the mat rais